Yealink SIP VP-T49G User Manual page 74

User Guide for SIP VP-T49G IP phone
6. Tap to specify a ring tone for the group.
7. Tap the desired ring tone in the pop-up dialog box.
If Auto is selected, this group will use the ring tone according to the priority: Contact
ring tone (refer to
ring tone (refer to
the ring tone according to the priority: Contact ring tone (refer to
) >Group ring tone.
Contacts
8. Tap OK to accept the change.
You can also edit or delete any newly added contact groups.
To edit a group in the local directory:
1. Tap .
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
74
) >Account ring tone (refer to
Adding Contacts
). If a specific ring tone is selected, this group will use
Ring Tones
) >Phone
Ring Tones
Adding