Yealink SIP VP-T49G User Manual page 182

User Guide for SIP VP-T49G IP phone
2. In the Forward block, mark the desired radio box in the Mode field.
3. Click Confirm to accept the change.
Note
Call forward mode is configurable via web user interface only.
To enable call forward in phone mode:
1. Do one of the following:
Tap
-
- Press
Swipe down from the top of the screen to enter the control center and toggle
-
FWD on.
2. Tap the desired forwarding type.
3. Depending on your selection:
a) If you tap Always Forward:
1) Tap the On radio box of the Always Forward field.
2) Enter the destination number you want to forward all incoming calls to in
the Forward To field.
182
->Features->Call Forward.
when the phone is idle.