Yealink SIP VP-T49G User Manual page 107

a call, refer to
With the handset on-hook, enter the desired number and tap the Send soft key, the
phone will then place a call using the headset automatically. For more information
on using the headset to place a call, refer to
To deactivate the headset mode:
1. Press
The HEADSET key LED goes out, and the icon
screen when the headset mode is deactivated.
You can use headset in priority when headset prior feature is enabled. This feature is
especially useful for permanent or full-time headset users.
To enable headset prior via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Headset Prior.
3. Click Confirm to accept the change.
To use headset prior, you should activate the headset mode in advance:
1. Physically connect the headset.
2. Press
Note
If headset prior is enabled, the headset mode will not be deactivated until you press the
HEADSET key again.
If headset prior is disabled, the headset mode can be deactivated by pressing the
Speakerphone key or the HEADSET key.
Headset prior is configurable via web user interface only.
Answering Calls on page 150.
again on the phone.
to activate the headset mode.
Customizing Your Phone
Placing Calls on page 148.
disappears from the touch
107