Yealink SIP VP-T49G User Manual page 237

3. Tap Delete.
4. Tap OK to accept the change or Cancel to cancel.
If you want to delete all paging groups, you can tap Delete All.
You can also configure the phone to use a default codec for sending multicast RTP
stream via web user interface.
To configure a default codec for multicast paging via web user interface:
1. Click on Features->General Information.
2. Select the desired codec from the pull-down list of Multicast Codec.
The default codec is G722.
3. Click Confirm to accept the change.
Note If G722 codec is used for multicast paging, the touch screen will display the icon
indicate that it is providing high definition voice.
Default codec for multicast paging is configurable via web user interface only.
Advanced Phone Features
to
237