Yealink SIP VP-T49G User Manual page 220

User Guide for SIP VP-T49G IP phone
When you insert a USB flash drive into the USB port on your phone, you can record
active calls or conferences (audio-only or video calls) by tapping the Record soft key on
your phone.
The recorded video calls are saved in *.mkv format and include a date/time stamp and
the other party's number/IP address/name (or the first person's number/IP address/name
you called), for example, 20150731-1630-Mishoel.mkv was created on July 31, 2015, at
16:30 and you have a call with Mishoel. The recorded audio-only calls are saved in
*.aac format. The recorded calls are stored at the path Menu->USB->Browse Audio,
you can play it back on your phone.
The approximate time remaining for recording (the free space for the USB device) is
shown at the path Menu->USB->Storage Space.
Note
If you use a record key to record a call, the recorded file will be stored in servers. For
more information, refer to
Before recording any call, especially those involving PSTN, it is necessary to know about
the rules and restrictions of any governing call-recording in the place you are in. It is also
very important to have the consent of the person you are calling before recording the
conversation.
The Record soft key controls the recording function, and is available (you need to tap
the More soft key to see it):
When there are one or more calls connected to your phone

During an active call

When calls are on hold or muted

During a semi-attended or attended transfer

During a conference call

The Record soft key is not available:
When there are no connected calls on your phone

When you place a new call (to transfer or to conference)

When the phone prompts you to answer an incoming call

The recording is not be paused when the following occurs:
You place a call on hold.

You mute a call.

You set up a conference call

You perform the semi-attended or attended transfer

An incoming calls arrives on your phone

220
Call Recording Using a Record Key on page 226.