Yealink SIP VP-T49G User Manual page 46

User Guide for SIP VP-T49G IP phone
Once the connection has completed successfully, the prompt ―Connect Success.‖
appears next to the desired SSID.
The connected wireless network will be saved in the storage network list. You can
tap The storage network to view all the storage wireless networks.
You can also swipe down from the top of the screen to enter the control center, and
toggle Wi-Fi on. The phone will automatically search for wireless network in your area
and try to connect the wireless network with highest priority which is saved in the
storage network list. If there are no available wireless networks or the phone cannot
connect the wireless network saved in the storage network list, the touch screen will
prompt ―No available Wi-Fi, go to Wi-Fi setting now‖. Tap OK. Repeat steps 4 to 6 to
connect to the desired wireless network.
You can also manually connect your phone to an available wireless network via web
user interface at the path Network->Wi-Fi.
Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure
wireless networks. WPS can automatically configure a wireless network with a network
name (SSID) and strong WPA data encryption and authentication.
Two methods supported by Yealink IP phones in the Wi-Fi protected setup:
Push Button Configuration (PBC): The user simply has to push the WPS key on both

the IP phone and gateway/router to connect.
Personal Identification Number (PIN): The user has to enter a WPS PIN generated

randomly by the IP phone on the gateway/router to connect.
46