Yealink SIP VP-T49G User Manual page 218

User Guide for SIP VP-T49G IP phone
To pick up an incoming call when the IP phone is idle:
1. Tap the BLF key.
The incoming call of the monitored user is answered on the IP phone.
Note
If the call pickup code is not configured, the phone will place a call to the monitored
user instead of picking up an incoming call of the monitored user when you tap the BLF
key.
You can use the BLF List feature to monitor a list of users defined by your system
administrator. For example, your system administrator enables BLF List, and creates a
BLF List URI (e.g., BLFList@example.com) including a list of user1, user2 on the server.
The BLF List keys on the IP phone can present the status of user1 and user2. The key LEDs
illuminate either flashing or solid depending on the status of those users. For more BLF
List key LED indications, refer to
You can use the BLF List keys in the following ways:
When the monitored user is idle, tap the BLF list key to dial out the phone number.

When there is already an active call on the IP phone, you can transfer the active

call to the monitored user by tapping the BLF List key. The phone handles the active
call differently depending on the transfer mode on DSS key. For more information
on the transfer mode on DSS key, refer to
When the monitored user receives an incoming call, tap the BLF list key to pick up

the call directly. Before picking up an incoming call, ensure that the BLF List Pickup
code has been configured in advance. If the code is not configured, the phone will
place a call to the monitored user instead of picking up the incoming call of the
monitored user when you tap the BLF List key.
When there is a conversation on the monitored user, tap the BLF list key to barge in

and set up a conference call. Before barging in an active call, ensure that the BLF
List Barge In Code has been configured in advance. If the code is not configured,
the phone will place a call to the monitored user instead of barging in an active
call of the monitored user when you tap the BLF List key.
When a call is being parked against the monitored phone, tap the BLF List key to

retrieve the parked call from the monitored user. Before retrieving the parked call,
ensure that the BLF List Retrieve Call Parked Code has been configured in advance.
If the code is not configured, the phone will place a call to the monitored user
instead of retrieving the parked call when you tap the BLF List key.
To configure BLF List settings via web user interface:
1. Click on Account->Advanced.
218
LED Instructions on page 18.
Transfer on page 129.