Yealink SIP VP-T49G User Manual page 28

User Guide for SIP VP-T49G IP phone
touchline and stick it down; connect one end of the USB3.0 cable to the camera.
Remove the other piece of the fastener's liner and attach to the external
-
monitor; attach the camera to the external monitor by pressing two sides of
Dual Lock together. Make sure the camera is vertical and not askew otherwise
the near-site video image will be crooked. You are advised to attach the
camera to the external monitor whose back is straight.
Connect the other end of USB3.0 cable to the IP phone.
-
Connect one end of the HDMI cable to the HDMI port on the phone, and
-
connect the other end to the HDMI port on the external monitor.
After you connect an external monitor to your phone, the icon
status bar of the touch screen, and the touch screen will prompt ―Ext. Display
connected‖.
Note
You can adjust the camera angle by rotating it up and down, and you have to press on
the back of camera to rotate it.
If you want to insert the camera back to the IP phone and do not torn the 3M Dual Lock,
please insert forcibly until the camera indicator LED illuminates solid green. And the
embossing on the camera does not need to insert into the groove on the IP phone.
You have two options for network connection. You can select one of them according to
the current office environment.
Connecting to the wired network

Connecting to the wireless network

You can connect your phone to a wired network.
28
will display on the