Call Waiting - Yealink SIP VP-T49G User Manual

User Guide for SIP VP-T49G IP phone
desired contact to dial out.
Tap Directory, and then tap Remote Phone Book. Search for the contact and tap
-
the desired contact to dial out. (Remote phone book should be configured in
advance, refer to
- Tap History, and then tap the desired list. Tap the desired entry to dial out.
3. After the party answers the call, press
the transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can enable or disable call waiting on the phone. If call waiting is enabled, you can
receive another call when there is already an active call on the phone. Otherwise,
another incoming call is automatically rejected by the phone with a busy message
when there is an active call on the phone. You can also enable or disable the phone to
play a warning tone when receiving another call.
To configure call waiting via phone user interface:
1. Tap ->Features->Call Waiting.
2. Tap the On radio box of the Call Waiting field.
3. Tap the On radio box of the Play Tone field.
4. (Optional.) Enter the call waiting on code or off code respectively in the On Code
or Off Code field.
5. Tap the Save soft key to accept the change or
Call waiting is configurable via web user interface at the path Features->General
Information.
192
Remote Phone Book on page 94 for more information.)
or tap the Transfer soft key to complete
to cancel.