Yealink SIP VP-T49G User Manual page 149

You can enter the number using the onscreen keyboard.
3. Press
The key is configured as a send key by default. You can also set the * key as the
send key, or set neither. For more information, refer to the
You can also tap History or Directory to search for an entry or contact after picking up
the handset, and then tap the desired entry or contact to place a call.
Note
You can also dial using the SIP URI or IP address. To obtain the IP address of a phone, tap
->
Menu Status, when the phone is idle. The maximum SIP URI or IPv4 address length is 32
characters. For example, SIP URI: 3606@sip.com, IP: 192.168.1.15.
Your phone may not support direct IP dialing. Contact your system administrator for more
information.
To place a call using the hands-free speakerphone mode:
Do one of the following:
With the handset on-hook, press
-
Enter the desired number using the keypad or the onscreen keyboard.
Press
With the handset on-hook, enter the desired number using the keypad or the
-
onscreen keyboard.
Press
To place a call using the headset:
Do one of the following:
With the optional headset connected, press
-
Tap the line key to obtain a dial tone.
, or tap Send.
or tap Send.
, or tap Send.
Basic Phone Features
Key as Send
or tap the line key to obtain a dial tone.
to activate the headset mode.
on page 65.
149