Time & Date - Yealink SIP VP-T49G User Manual

User Guide for SIP VP-T49G IP phone
4. Tap the Save soft key to accept the change.
Text displayed on the phone user interface will change to the selected language.
To change the language for the web user interface:
1. Click on Settings->Preference.
2. Select the desired language from the pull-down list of Language.
3. Click Confirm to accept the change.
Text displayed on the web user interface will change to the selected language.
The time and date are displayed in the center of screen. You can configure the phone to
obtain the time and date from the SNTP server automatically, or configure the time and
date manually. If the phone cannot obtain the time and date from the Simple Network
Time Protocol (SNTP) server, contact your system administrator for more information.
To configure the SNTP setting via phone user interface:
1. Tap ->Basic->Time & Date->General.
2. Tap the Type field.
3. Tap SNTP Settings in the pop-up dialog box.
4. Tap the Time Zone field.
5. Tap the time zone that applies to your area in the pop-up dialog box.
The default time zone is ―+8‖.
6. Enter the domain names or IP addresses of SNTP servers in the NTP Server1 and
NTP Server2 fields respectively.
7. Tap the Daylight Saving field.
8. Tap the desired value in the pop-up dialog box.
62