Yealink SIP VP-T49G User Manual page 166

User Guide for SIP VP-T49G IP phone
Swipe down from the top of the screen to enter the control center and tap Video.
-
To configure the scene mode when previewing near-site video:
1. Tap Standard Mode.
2. Tap the desired item in the pop-up dialog box.
If you select Manual Mode, the scene will change the mode that you have
configured already at the path
more information, refer to
3. Press
Note
The soft keys (
unless you tap the touch screen.
166
Scene Mode
or tap Exit Video to return to the idle screen.
Standard Mode
and Exit Video) are hidden after they display 5 seconds,
->Basic->Camera Setting->Scene Mode. For
on page 154.