Yealink SIP VP-T49G User Manual page 18

User Guide for SIP VP-T49G IP phone
Icons
Power Indicator LED
LED Status
Solid red
Fast flashing red
Slow flashing red
Off
Camera Indicator LED
LED Status
Solid green
Flashing green
Solid red
Slow flashing red
Off
Note
The above introduces the default power indicator LED status. The status of the power
indicator LED is configurable via web user interface. For more information, refer to
Yealink_SIP-T2_Series_T19(P)
18
Description
BLF/BLF list hold state
BLF/BLF list call park state
BLF/BLF List failed state
The phone is initializing.
The phone is ringing.
The phone receives a voice mail.
The phone is powered off.
The phone is idle.
The phone is busy.
The call is placed on hold or is held.
The call is muted.
The phone is powered on and the camera is properly
connected to the phone.
The camera is idle.
The phone receives an audio-only call.
The phone receives a video call.
There is an active video call.
The video call is muted.
The video call is held.
The shutter switch is open, but the near-site video is
stopped transmitting during a video call.
The video call is placed on hold.
The phone is powered off.
The camera is not properly connected to the phone.
The shutter switch is closed.
E2_T4_Series_CP860_IP_Phones_Administrator_Guide.
Description
Description