Yealink SIP VP-T49G User Manual page 29

Before connecting your phone to the wired network, it is important to note that the Wi-Fi
feature should be disabled. For more information, refer to
Network on page 29.
Note
The phone can also share the network with another network device such as a PC
(personal computer). This is an optional connection. For more information on this
function, contact your system administrator.
Yealink SIP VP-T49G IP phone supports Wi-Fi feature. You can connect your phone to a
wireless network. The wireless network is more convenient and cost-effective than wired
network. The PC port is not supported in wireless network. For more information on how
to connect to a wireless network, refer to
After your phone is powered on, the system boots up and performs the following steps:
Automatic Phone Initialization
The phone finishes the initialization by loading the saved configuration. The touch
screen displays "Initializing...Please wait" during the initialization.
DHCP (Dynamic Host Configuration Protocol)
The phone attempts to contact a DHCP server in your network to obtain valid IPv4
network settings (e.g., IP address, subnet mask, default gateway address and DNS
address) by default.
Note
If your network does not use DHCP , proceed to
Connecting to the Wireless
Wireless Network Settings
Basic Network Settings
Getting Started
on page 44.
on page 41.
29