Yealink SIP VP-T49G User Manual page 148

User Guide for SIP VP-T49G IP phone
You can place a call in one of three ways using your SIP VP-T49G IP phone:
Using the handset
-
Using the speakerphone
-
Using the headset
-
You can also dial the number first, and then choose the way you want to speak to the
other party.
You can also dial an entry/contact from call history, local directory or remote phone
book. For more information, refer to
Management
During a call, you can alternate between Speakerphone, Headset, and Handset modes
by pressing the Speakerphone key, the HEADSET key, or by picking up the handset.
The call duration of the call and far-site's information (name or phone number) are
visible on the touch screen. In the figure below, the call to ―Habas Duo‖ has lasted 58
seconds.
To place a call using the handset:
1. Pick up the handset.
2. Enter the desired number using the keypad.
148
Contact Management
on page 100.
on page 72 and Call History