Yealink SIP VP-T49G User Manual page 119

The touch screen displays ―Connect Success.‖.
The Bluetooth icon
And the IP phone automatically assigns a Mobile Line key.
For more information on how to configure the Mobile Line key, refer to
page 131. Before you configure the Mobile Line key, make sure the Bluetooth-Enabled
mobile phone is connected. Otherwise the IP phone will prompt ―Mobile Account is not
connected!‖. If the distance between mobile phone and IP phone is out of the range of
10 meters or the Bluetooth mode on the mobile phone is deactivated, you can tap the
Mobile Line key to reconnect the last paired Bluetooth-Enabled mobile phone.
At the first time the mobile phone has connected to the IP phone, both mobile phone
and IP phone will prompt ―Would you like to sync phone contacts temporarily?‖. Tap OK
to enable the IP phone to sync the mobile phone contacts temporarily. After the
synchronous process is successful, Mobile Contacts directory will appear in the IP phone
will display on the status bar of the touch screen.
Customizing Your Phone
Mobile Line on
119