User Guide for SIP VP-T49G IP phone
3.
Tap the desired value (IPv4, IPv6 or IPv4 & IPv6) in the pop-up dialog box.
4.
Tap the Save soft key to accept the change or
You can configure a static IPv4 address for the IP phone. Before configuring it, make sure
that the IP mode is configured as IPv4 or IPv4 & IPv6.
To configure a static IPv4 address via phone user interface:
1.
Tap
->Advanced (default password: admin) ->Network->WAN Port->IPv4.
2.
Tap the Type field.
3.
Tap Static IP in the pop-up dialog box.
4.
Enter the desired values in the IP, Subnet Mask, Gateway, Primary DNS and
Secondary DNS fields respectively.
5.
Tap the Save soft key to accept the change or
You can configure a static IPv6 address for the IP phone. Before configuring it, make sure
that the IP mode is configured as IPv6 or IPv4 & IPv6.
42
to cancel.
to cancel.