Return Codes; Access Disable Config-Sharing Subcommand; Format - Sun Microsystems Fire V20z Management Manual

Return Codes

lists the return codes for this subcommand.
TABLE B-3
Return Codes for Subcommand access enable config-sharing
TABLE B-3
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_RPCTimeout
NWSE_RPCNotConnected
NWSE_NoPermission

Access Disable Config-Sharing Subcommand

Description: This command is run on the SP. It prevents an SP from being a source of
configuration settings for other SPs.

Format

access disable config-sharing
Return Codes
lists the return codes for this subcommand.
TABLE B-4
Return Codes for Subcommand access disable config-sharing
TABLE B-4
Return Code
NWSE_Success
NWSE_InvalidUsage
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting
1
options specified.
Request was issued, but was not serviced by the
2
server. RPC procedure timed out and the request
may or may not have been serviced by the server.
Unable to connect to the RPC server.
3
Not authorized to perform this operation.
6
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting
1
options specified.
Appendix B Access Commands 129