Return Codes; Access Update User Subcommand; Format - Sun Microsystems Fire V20z Management Manual

Return Codes

lists the return codes for this subcommand.
TABLE B-44
Return Codes for Subcommand access update password
TABLE B-44
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_RPCTimeout
NWSE_RPCNotConnected
NWSE_InvalidArgument
NWSE_NotFound
NWSE_NoPermission

Access Update User Subcommand

Description: Updates the login information (password or group) for the user.

Format

access update user {-u | --user} USER {-p | --password} PASSWORD
{-g | --group} GROUP
lists the arguments for this subcommand.
TABLE B-45
Note – The -p and -g arguments are optional but you must specify at least one.
Arguments for Subcommand access update user
TABLE B-45
Argument
{-u | --user}
{-p | --password}
{-g | --group}
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting options
1
specified.
Request was issued, but was not serviced by the server.
2
RPC procedure timed out and the request may or may
not have been serviced by the server.
Unable to connect to the RPC server.
3
One or more arguments were incorrect or invalid.
4
Entity (user, service, file, path or other) was not found.
5
Not authorized to perform this operation.
6
Description
The name of the user to update.
The user's new password. The -p and -g options are optional but
you must specify at least one.
The new group to which to reassign to the user. The -p and -g
options are optional but you must specify at least one.
Appendix B Access Commands 155