Sp Autoconfigure Subcommand; Format - Sun Microsystems Fire V20z Management Manual

SP Autoconfigure Subcommand

Description: Copies the configuration settings from one SP to one or more other SPs.
an SP with the same configuration as that of another SP.
You can also perform autoconfiguration from the operator panel to perform this
same function. For more information, see
Method)" on page 40.
The command invokes a series of https requests for all of the configuration files from
the source machine and then loads configuration data to the second SP. The
uploaded files are copied to the local pstore file and the second SP is rebooted.
While this operation is running, you cannot execute any other configuration
changes.
By default, configuration sharing is disabled and you must enable it on the source
machine.
To identify the status of configuration sharing on a server, refer to
■
Config-Sharing Subcommand" on page
To enable configuration sharing, refer to
■
Subcommand" on page
To disable configuration sharing, refer to
■
Subcommand" on page
After the command is executed, a message displays indicating that the SP will be
rebooted. The SSH connection then terminates.

Format

sp autoconfigure {{ -s | --sp } SP_IP_OR_HOST [-H |--noheader]
lists the arguments for this subcommand.
TABLE H-47
Arguments for Subcommand sp autoconfigure
TABLE H-47
Argument
{ -s | --sp }
[-H | --noheader]
"Autoconfiguring the SP (Optional
130.
"Access Enable Config-Sharing
128.
"Access Disable Config-Sharing
129.
Description
The DNS host name or IP address of the machine from which to
copy the configuration information.
Suppresses header output.
Appendix H
"Access Get
Service Processor Commands 253