Access Public Key Subcommands; Access Add Public Key Subcommand; Format - Sun Microsystems Fire V20z Management Manual

Access Public Key Subcommands

The subcommands listed in
public-key users.
Access Public Key Subcommands
TABLE B-30
Subcommand
access add public key
access get public key users
access delete public key

Access Add Public Key Subcommand

Description: Installs a public key for SSH authentication which enables SSH logins
and remote command execution without being prompted for a password. You must
first generate a key pair (RSA or DSA) which you can generate using the
ssh-keygen command included with OpenSSH.
Only local users can install public keys (not users who gain authorization through
■
a mapping of a directory-services group)
Managers can add keys for any local user.
■
Up to 10 users can install public keys; each user can install only one key.
■
The maximum key length supported is 4096 bits.
■

Format

access add public key {–k | --keyfile} PUBLIC_KEY_FILE [–u | --user]
USER
lists the arguments for this subcommand.
TABLE B-31
Arguments for Subcommand access add public key
TABLE B-31
Arguments
{–k | --keyfile}
{-u | --user}
allow you to manage public keys and
TABLE B-30
Description
Installs a public key for SSH authentication.
Determines which users have public keys installed.
Removes a user's public key.
Description
Specifies the user's public RSA or DSA key.
Specifies the user for which this key will be installed. The default
is the current user if no user is specified.
Appendix B Access Commands 147