Server Mib Details - Sun Microsystems Fire V20z Management Manual

Server MIB Details

SNMP uses object identifiers (OIDs) to provide name variables by which objects are
grouped together for easier reference. These servers provide agents for the MIBs
shown in .
TABLE 3-3
SNMP MIBs
TABLE 3-3
MIB
SP-MasterAgent-MIB
.mib
SP-INVENTORY-MIB
.mib
SP-SST-MIB.mib
SP-PLATFORM-MIB.mib
SP-EVENT-MIB.mib
SP-GROUP-MIB.mib
OID
.1.3.6.1.4.1.9237
.1.3.6.1.4.1.9237.2.1.1.1
.1.3.6.1.4.1.9237.2.1.1.1.2
.1.3.6.1.4.1.9237.2.1.1.1.3
.1.3.6.1.4.1.9237.2.1.1.4
.1.3.6.1.4.1.9237.2.1.1.5
.1.3.6.1.4.1.9237.2.1.1.6
.1.3.6.1.4.1.9237.2.1.1.7
Description
Creates the main trunk of the server
MIB tree. All other MIBs of the SP
branch from this tree. To be loaded
first while integrating with any
third-party framework.
Used for querying inventory
information for all Sun Fire V20z
and Sun Fire V40z servers hardware
and software components.
Hardware Inventory Table: Collects
all hardware component inventory.
Software Inventory Table: Collects
all software component inventory.
Defines objects for the System State
Table in the SP. Contains all sensor
readings, including the name of the
sensor, its current value, maximum
allowed value, measurement type,
scale and scanning interval.
Defines objects for the platform
SNMP which includes osstate,
platform state and platform IP
table.
Identifies the OIDs associated with
all SNMP traps originated from the
SP.
Defines objects for the SP, including
host name, DNS, a reboot node, a
node to hold the last port 80
postcode, a clone tree and an IP
table.
Chapter 3 SNMP Server Management 95