Configuring Snmp Trap Destinations; Configuring Snmp Destinations - Sun Microsystems Fire V20z Management Manual

Configuring SNMP Trap Destinations

Although SNMP traps are generated for events that occur on the SP, you must
configure where these traps are to be sent. There is no default destination for traps.
You can use the server-management subcommands (see
configure SNMP destinations.
For more information on these subcommands, refer to
TABLE 3-2
Subcommand
sp get snmp-destinations
sp add snmp-destination
sp delete snmp-destination

Configuring SNMP Destinations

Administration- and manager-level users can define SNMP destinations to which
SNMP events (alerts) will be sent using this option. All users can view the current
destinations (using read-only access).
The number of destinations you can create is limited due to memory constraints.
You can configure SNMP destinations using the sp snmp subcommands. For more
information on these subcommands, refer to
94 Sun Fire V20z and Sun Fire V40z Servers—Server Management Guide • July 2005
Subcommands for Configuring SNMP Destinations
Appendix
Description
Displays all the available SNMP destination
IP addresses and host names to which the SP will
send.
Adds a new SNMP destination one IP address or host
name at a time.
Removes an existing SNMP destination one
IP address or host name at a time.
Appendix
) on the SP to
TABLE 3-2
H.
H.