Operator Panel - Sun Microsystems Fire V20z Management Manual

Operator Panel

You can use the operator panel to configure network settings for the SP. See
FIGURE 1-4
Note – The SP defaults to Dynamic Host Configuration Protocol (DHCP)
networking if the operator panel is not interactively engaged on the first power-up.
FIGURE 1-4
FIGURE 1-5
8 Sun Fire V20z and Sun Fire V40z Servers—Server Management Guide • July 2005
or for the operator panel location on your server.
FIGURE 1-5
Operator-panel buttons
Sun Fire V20z Server Operator Panel and Buttons
Sun Fire V40z Server Operator Panel and Buttons
Operator panel display
Operator-panel buttons (3)
Operator panel display