Sp Add Snmp Destination Subcommand; Format; Return Codes - Sun Microsystems Fire V20z Management Manual

SP Add SNMP Destination Subcommand

Description: Adds a single SNMP destination (either IP address or host name).

Format

sp add snmp-destination IP ADDRESS/HOSTNAME
lists the argument for this subcommand.
TABLE H-77
Argument for Subcommand sp add snmp-destination
TABLE H-77
Arguments
IP ADDRESS/HOSTNAME

Return Codes

lists the return codes for this subcommand.
TABLE H-78
Return Codes for Subcommand sp add snmp-destination
TABLE H-78
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_RPCTimeout
NWSE_InvalidArgument
NWSE_NoPermission
NWSE_NoMemory
NWSE_RPCConnRefused
Description
Specifies the IP address or name of the host for the destination
you wish to add.
This argument is repeatable to add multiple destinations at one
time; however, the number of destinations you can create is
limited due to memory constraints.
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting
1
options specified.
Request was issued, but was not serviced by the
2
server. RPC procedure timed out and the request may
or may not have been serviced by the server.
One or more arguments were incorrect or invalid.
4
Not authorized to perform this operation.
6
Insufficient memory.
8
RPC connection refused.
12
Appendix H Service Processor Commands 273