Options - Sun Microsystems Fire V20z Management Manual

Options

lists the options available for IPMItool.
TABLE 2-4
Options for IPMItool
TABLE 2-4
Option Description
-h Provides help on basic usage from the command line.
-c Makes the output suitable for parsing, where possible, by separating fields
with commas instead of spaces.
-g Attempts to make IPMI-over-LAN communications more robust.
-V Displays the version information.
-v Increases the amount of text output. This option may be specified more
than once to increase the level of debug output. If given three times, you
receive hexdumps of all incoming and outgoing packets.
-I interface Selects the IPMI interface to use. The possible interfaces are LAN or open
interface.
-H address Displays the address of the remote server; it can be an IP address or host
name. This option is required for the LAN interface connection.
-P password Displays the password for the remote server; the password is limited to a
maximum of 16 characters. The password is optional for the LAN
interface; if a password is not provided, the session is not authenticated.
Chapter 2 IPMI Server Management 75