Using The Ssh Protocol; Interactive Shell On The Sp; Preface Text - Sun Microsystems Fire V20z Management Manual

Using the ssh Protocol

You must use ssh to execute these commands on the service processor (SP). There
are two ways to do this:
Use the interactive shell on the SP.
■
Preface each command with a set piece of text.
■

Interactive Shell on the SP

To use the interactive shell:
●
Log into and authenticate on the interactive shell by running the command:
# ssh -l spipaddr spuser

Preface Text

●
Preface each command with the following text:
# ssh -l spipaddr spuser
122 Sun Fire V20z and Sun Fire V40z Servers—Server Management Guide • July 2005