Sun Microsystems Fire V20z Management Manual page 103

Expressions and Parameters for IPMItool (4 of 4)
TABLE 2-5
Expression Parameter
fru print
sdr list
sel info
clear
list
Sub-parameter Description and examples
arp respond Sets the BMC-generated ARP responses.
[on|off]
arp generate Sets the BMC-generated gratuitous ARPs.
[on|off]
arp interval Sets the interval for the BMC-generated gratuitous ARPs.
[seconds] s
auth level,... This command sets the valid authtypes for a given auth
type,... level.
Levels can be: callback, user, operator, admin
Types can be: none, md2, md5
Reads all inventory data for the Customer Replaceable
Units (CRUs) and extracts such information as serial
number, part number, asset tags and short strings
describing the chassis, board or product.
Reads the Sensor Data Record (SDR) and extracts sensor
information, then queries each sensor and prints its name,
reading and status.
Queries the BMC for information about the system event
log (SEL) and its contents.
Clears the contents of the SEL.
The clear command cannot be undone.
Lists the contents of the SEL.
Chapter 2 IPMI Server Management 79