Return Codes - Sun Microsystems Fire V20z Management Manual

Return Codes

TABLE H-84
TABLE H-84
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_RPCTimeout
NWSE_RPCNotConnected
SP SSL Subcommands
The subcommands in
TABLE H-85
Subcommand
sp disable ssl-required
sp enable ssl-required
sp get ssl
sp set ssl
SP Disable SSL-Required Subcommand
Description: Disables automatic redirect to secure HTTP URLs. With SSL disabled,
HTTP requests are serviced directly without redirecting to HTTPS. HTTPS requests
continue to be secure.
278 Sun Fire V20z and Sun Fire V40z Servers—Server Management Guide • July 2005
lists the return codes for this subcommand.
Return Codes for Subcommand sp set snmp proxy community
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting options
1
specified.
Request was issued, but was not serviced by the server.
2
RPC procedure timed out and the request may or may
not have been serviced by the server.
Unable to connect to the RPC server.
3
TABLE H-85
SP SSL Subcommands
Description
Disables forced use of the secure HTTP (https) protocol.
Enables forced use of the secure HTTP (https) protocol.
Determines if the Apache Web server is using
factory-supplied files or user-supplied files.
Allows you to use site SSL certificates in the
SP environment.
manage SSL capabilities.