Ipmi Enable Channel Subcommand; Format; Return Codes - Sun Microsystems Fire V20z Management Manual

IPMI Enable Channel Subcommand

Description: Allows you to enable one of two IPMI channels.

Format

ipmi enable channel {sms | lan}
lists the arguments for this subcommand.
TABLE E-4
Arguments for Subcommand ipmi enable channel
TABLE E-4
Arguments Description
The ID of the channel to enable for the System Interface; not case-sensitive.
sms
The ID of the channel to enable for the LAN Interface; not case-sensitive.
lan
If you are activating the LAN channel for the first time, you are prompted
for a password to associate with the null user.

Return Codes

lists the return codes for this subcommand
TABLE E-5
Return Codes for Subcommand ipmi enable channel
TABLE E-5
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_InvalidArgument
NWSE_NoPermission
NWSE_ServiceNotAvailable
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting
1
options specified.
One or more arguments were incorrect or invalid.
4
Not authorized to perform this operation.
6
Requested service is not available.
24
Appendix E IPMI Commands 179