Format - Sun Microsystems Fire V20z Management Manual

Format

sp disable ssl-required
Return Codes
lists the return codes for this command.
TABLE H-86
Return Codes for Subcommand sp disable ssl-required
TABLE H-86
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_NoPermission
NWSE_NoMemory
NWSE_FileError
NWSE_ServiceNotAvailable
SP Enable SSL-Required Subcommand
Description: Enables automatic redirect to secure HTTP URLs. With SSL enabled,
HTTP requests are automatically redirected to equivalent HTTPS requests to
maintain site security.
SSL version 0.9.6j is supported.
Format
sp enable ssl-required
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting
1
options specified.
Not authorized to perform this operation.
6
Insufficient memory.
8
File open, file missing, or a read or write error
18
occurred.
Requested service is not available.
24
Appendix H Service Processor Commands 279