Sun Microsystems Fire V20z Management Manual page 43

After you create the initial manager account, the setup account is deleted and you
are logged out of the server. You can then log in using the new initial manager
account, from which you can create other user accounts.
Note – If you are prompted for a password, this indicates that the SP has already
been secured with an account. If you do not know the management user name and
password, you can reset the SP from the operator panel by navigating to the SP
menu and selecting the Use defaults option. Note that all current settings for
users and networks will be lost and the SP will reboot.
Creating the Initial Account From the SM Console
For information about the SM Console features, see
Features" on page
To create the first manager account from the SM Console:
1. Enter the SP name or IP address as the URL or address in a browser, to enter the
SM Console.
Note – When you create the initial manager account, you are prompted to accept a
license agreement. After you create the initial manager account, this prompt no
longer appears.
2. At the Create Initial Manager-Level User ID screen, enter a user ID for this
account.
3. Enter a password for the account.
4. Re-enter the password to confirm.
5. Click the check mark button.
6. Use the SM Console to select initial configuration options.
After you create the initial manager-level user, the Initial Configuration Checklist
screen displays in the SM Console. This enables you to determine the options you
want for the initial setup of the SP.
The Initial Configuration Checklist is a table that lists the SM Console menu options
and the commands you use to configure each option. It also includes links to the
online help that provides instructions for each option.
45.
"Systems Management Console
Chapter 1 Introduction 19