Return Codes for Subcommand sensor get (Continued)
TABLE G-3
Return Code
NWSE_InvalidArgument
NWSE_NotFound
NWSE_NoPermission
Sensor Set Subcommand
Description: Allows you to set some of the data associated with a specific sensor or
a class of sensors.
Format
sensor set [{-i | --id} SENSOR_ID [{-i | --id} SENSOR_ID] ...]
{[{-C | --crithigh} VALUE] [[{-c | --critlow} VALUE]
[{-W | --warnhigh] VALUE] [{-w | --warnlow} VALUE] [{-v | --value}
{on|off}] | {-r | --reset}}
sensor set [{-t | --type] TYPE_ID] {[{-C | --crithigh} VALUE]
[[{-c| --critlow} VALUE] [{-W | --warnhigh] VALUE] [{-w | --warnlow}
VALUE] [{-v | --value} {on|off}] | {-r | --reset}}
sensor set [{-R | --resetall}]
ID
Description
One or more arguments were incorrect or invalid.
4
Entity (user, service, file, path or other) was not found.
5
Not authorized to perform this operation.
6
Appendix G
Sensor Commands
217
Need help?
Do you have a question about the Fire V20z and is the answer not in the manual?