Return Codes - Sun Microsystems Fire V20z Management Manual

lists the information that displays, depending on whether the rear-panel
TABLE F-8
serial port is connected to the platform or to the SP.
Displayed Data
TABLE F-8
Column Description
Displays No if the external serial port is connected to the platform.
Enabled
Otherwise, the external serial port is connected to the SP console; you can
access the platform serial console through the SP command line by
running the subcommand platform console.
Indicates the communications speed of the link.
Speed
Indicates whether ANSI escape code and duplicate information pruning
Prune
is enabled.
Indicates the approximate size at which log rotation occurs (for example,
Log Trigger
when the file console.0 is removed, the current log is moved to
console.0 and a new log file is opened).
Pruning of log-file contents happens only when rotation occurs. The
minimum size for a log file is 64KB; the maximum size is 1024KB.

Return Codes

lists the return codes for this subcommand.
TABLE F-9
Return Codes for Subcommand platform get console
TABLE F-9
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_RPCTimeout
NWSE_RPCNotConnected
NWSE_NoPermission
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting options
1
specified.
Request was issued, but was not serviced by the server.
2
RPC procedure timed out and the request may or may
not have been serviced by the server.
Unable to connect to the RPC server.
3
Not authorized to perform this operation.
6
Appendix F Platform Commands 195