Return Codes; Sp Set Jnet Subcommand; Format - Sun Microsystems Fire V20z Management Manual

Return Codes

TABLE H-29
TABLE H-29
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_NoMemory
NWSE_Busy
NWSE_HostDown

SP Set JNET Subcommand

Description: Sets or modifies the SP and platform network addresses for JNET.
Because of the firewall between these drivers, you must specify both addresses at the
same time.
Both the SP and Platform JNET addresses must be on the same Class C subnet.

Format

sp set jnet {-p | --platform} IP ADDRESS {-s | --sp} IP ADDRESS
236 Sun Fire V20z and Sun Fire V40z Servers—Server Management Guide • July 2005
lists the return codes for this subcommand.
Return Codes for Subcommand sp get jnet
ID
0
1
8
9
14
Description
Command successfully completed.
Invalid usage: bad parameter usage, conflicting
options specified.
Insufficient memory.
Device or resource is busy.
Host is down.