Return Codes; Sp Get Tdulog Subcommand; Format - Sun Microsystems Fire V20z Management Manual

Return Codes

lists the return codes for this subcommand.
TABLE H-50
Return Codes for Subcommand sp get status
TABLE H-50
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_RPCTimeout
NWSE_RPCNotConnected
NWSE_NoPermission

SP Get TDULog Subcommand

Description: The Troubleshooting Dump Utility (TDU) captures debug data. When
you execute this command, this data is gathered and stored on the SP in a
compressed tar file.

Format

sp get tdulog [{-f | --filename} FILENAME or STDOUT ]
[{-c | --cpuregs} CPU REGISTERS]
[{-p | --pciregs} PCI REGISTERS]
[{-r | --reset} RESET PLATFORM]
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting
1
options specified.
Request was issued, but was not serviced by the
2
server. RPC procedure timed out and the request may
or may not have been serviced by the server.
Unable to connect to the RPC server.
3
Not authorized to perform this operation.
6
Appendix H Service Processor Commands 255