Sp Update Diags Subcommand - Sun Microsystems Fire V20z Management Manual

SP Update Diags Subcommand

Description: Updates the current version of diagnostics, if an update is available.
While the SP functions normally without access to an external file system, a file
system is required to enable several features, including diagnostics. The SP software
uses a default version of diagnostics. However, if a new version is released and
stored on the Network Share Volume, you must explicitly point to that new version
to use it.
Format
sp update diags {-p | --path} <PATH_TO_DIAGS_FOLDER>
lists the argument for this subcommand.
TABLE H-97
Argument for Subcommand sp update diags
TABLE H-97
Argument
{-p | --path}
Return Codes
lists the return codes for this subcommand.
TABLE H-98
Return Codes for Subcommand sp update diags
TABLE H-98
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_InvalidArgument
NWSE_UnknownError
Description
Points to the location of the new diagnostics.
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting options
1
specified.
One or more arguments were incorrect or invalid.
4
Miscellaneous error not captured by other errors.
15
Appendix H Service Processor Commands 287