Mapping Directory Service Groups - Sun Microsystems Fire V20z Management Manual

Mapping Directory Service Groups

The Directory Service Group Mappings table identifies existing group mappings.
This table also provides options for mapping other directory service groups to an SP
group. For example, if Directory Services group 5 is mapped to manager, all
members of group 5 are granted manager-level privileges on the SP.
To map directory service groups from the SM Console:
1. Click Access Control>DS Group Mappings from the menu bar.
The current group mappings table displays. Directory services groups are listed
alphabetically.
Directory Services Group Mappings
FIGURE 1-14
2. Choose one of the following:
Select the radio button for the mapping you want to create (monitor, admin,
■
manager).
Select No Mapping to disable access to the SP.
■
Enter a new group in the text field and select one of the corresponding radio
■
button options to indicate the SP group for the new entry.
Select the Verify checkbox so that an error will display if a new group name is not
■
located in the directory service.
3. Click the check-mark button.
Chapter 1 Introduction 51