Return Codes; Sp Ip Subcommands; Sp Get Ip Subcommand - Sun Microsystems Fire V20z Management Manual

Return Codes

TABLE H-21
TABLE H-21
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_InvalidArgument
NWSE_NoPermission
NWSE_NoMemory
NWSE_Busy
NWSE_RPCConnected
NWSE_RPCConnRefused
NWSE_NoRouteToHost
NWSE_HostDown

SP IP Subcommands

The subcommands in
TABLE H-22
Subcommand
sp get ip
sp set ip

SP Get IP Subcommand

Description: Retrieves the ethernet-based network-configuration information for the
SP, including IP address, network mask and gateway. In addition, it indicates
whether the SP is configured to use DHCP or a static IP address.
232 Sun Fire V20z and Sun Fire V40z Servers—Server Management Guide • July 2005
lists the return codes for this subcommand.
Return Codes for Subcommand sp set hostname
ID
0
1
4
6
8
9
11
12
13
14
TABLE H-22
SP IP Subcommands
Description
Retrieves the ethernet-based network configuration information for
the SP.
Sets or modifies the SP network configuration.
Description
Command successfully completed.
Invalid usage: bad parameter usage, conflicting
options specified.
One or more arguments were incorrect or invalid.
Not authorized to perform this operation.
Insufficient memory.
Device or resource is busy.
RPC client already connected.
RPC connection refused.
No route to host (network down).
Host is down.
manage the SP network configuration.