Return Codes - Sun Microsystems Fire V20z Management Manual

TABLE G-2
Arguments
{-I | --noid}
[-H | --noheader]
{ -D | --Delim }

Return Codes

TABLE G-3
Note – There are some sensors whose value does not change, some that are there to
provide information in the event of a problem, and others to facilitate the proper
operation of the software.
Many of these sensors do not have a related component (parent) associated with
them. For example, the die-temperature sensor for a CPU has the CPU as its parent
component and a fan-speed sensor has the fan as its parent component; the
product-id sensor, however, only reports a static value and has no parent
relationship.
This relationship establishes the component(s) which is affected by changes in the
value of the sensor. You cannot modify the thresholds for sensors that do not have a
parent relationship, since an event will never occur for these threshold crossings.
TABLE G-3
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_RPCTimeout
NWSE_RPCNotConnected
216 Sun Fire V20z and Sun Fire V40z Servers—Server Management Guide • July 2005
Arguments for Subcommand sensor get (Continued)
Description
Suppresses the display of the sensor ID column. By default, this
column always displays when more than one sensor is selected.
Suppresses the column headings.
Delimits columns with the specified delimiter. Headings are
also delimited unless suppressed. The delimiter can be any
character or string.
lists the arguments for this subcommand.
Return Codes for Subcommand sensor get
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting options
1
specified.
Request was issued, but was not serviced by the server.
2
RPC procedure timed out and the request may or may
not have been serviced by the server.
Unable to connect to the RPC server.
3