Platform Get Power State Subcommand; Format; Return Codes - Sun Microsystems Fire V20z Management Manual

The subcommand platform set os state waits for the platform to boot; the
subcommand platform set power state only waits for the power to come on.

Platform Get Power State Subcommand

Description: Provides the ability to determine the platform power state from within
a script (whether the platform is on or off).

Format

platform get power state

Return Codes

TABLE F-23
TABLE F-23
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_RPCTimeout
NWSE_RPCNotConnected
NWSE_NoPermission
206 Sun Fire V20z and Sun Fire V40z Servers—Server Management Guide • July 2005
lists the return codes for this subcommand.
Return codes for Subcommand platform get power state
ID
0
1
2
3
6
Description
Command successfully completed.
Invalid usage: bad parameter usage, conflicting options
specified.
Request was issued, but was not serviced by the server.
RPC procedure timed out and the request may or may
not have been serviced by the server.
Unable to connect to the RPC server.
Not authorized to perform this operation.