Diagnostics Commands - Sun Microsystems Fire V20z Management Manual

C
A P P E N D I X

Diagnostics Commands

The diags commands allow you to manage the diagnostics tests.
TABLE C-1
Note – Every subcommand returns a return code upon completion.
Note – The diagnostics commands are also provided in the Sun Fire V20z and Sun
Fire V40z—Troubleshooting Techniques and Diagnostics Guide, 817-7184.
TABLE C-1
Subcommand
diags cancel tests
diags get modules
diags get state
diags get tests
diags run tests
diags start
diags terminate
lists the diags subcommands.
Diagnostics Subcommands
Description
Cancels one or more diagnostic tests, resulting in the deletion of
the results data.
Returns a list of test modules that are available. Queries the
framework to obtain the test module information.
Returns the state of the platform-diagnostics control server.
Returns data describing the diagnostic tests that are available
and their requirements and parameters.
Submits one or more diagnostic tests for execution.
Starts the Service Processor (SP) and platform-diagnostics
framework.
Terminates all diagnostics tests and terminates the diagnostics
subsystem.
157