Sun Microsystems Fire V20z Management Manual page 215

lists common COM1 values.
TABLE F-3
redirection.
Common COM1 Values
TABLE F-3
I/O Device Configuration
Serial port A
Base I/O address
Interrupt
Common Values for Console Redirection
TABLE F-4
Console Redirection
Com Port Address
Console connection
Baud Rate
Flow Control
Console Type
Note – You can change these values, as long as they are the same as serial-port
values for the operating system (OS). If your operating system supports the COM2-4
values, you can set these for the BIOS settings.
The serial-console settings in the platform OS should be set to match the
BIOS settings.
Enter the following while you are connected to the console:
^Ec character
where ^E represents Control-E and character is one of the entries in
Serial-Console Values
TABLE F-5
Character Function
Disconnects an attach read/write.
.
Sends a broadcast message.
b
Toggles flow control.
c
Takes down a console.
d
Changes the escape sequence.
e
TABLE F-4
Enabled
3F8
IRQ 4
On-board COM A
Direct
19.2K
None
ANSI
lists common values for console
Appendix F Platform Commands
:
TABLE F-5
191