Sp Miscellaneous Subcommands; Sp Create Test Events Subcommand - Sun Microsystems Fire V20z Management Manual

SP Miscellaneous Subcommands

The subcommands in
Miscellaneous SP Subcommands
TABLE H-40
Subcommand
sp create test events
sp get mac address
sp get port 80
sp get status
sp get tdulog
sp autoconfigure
sp reboot
sp reset

SP Create Test Events Subcommand

Description: This command helps you to test and validate different types of
configurations that you might be considering for the SP (for example, configurations
involving event forwarding, such SNMP, SMTP, log files or directory services).
When you execute this command, the SP generates three new events, each with
a different level of severity. To view these events, run the subcommand
sp get events. Then retrieve the configuration settings for SNMP, SMTP, and
logfiles and validate that the events reached the configured destinations.
SNMP
To configure destinations for SNMP traps, run the subcommand sp add
snmp-destination. To view your current settings, run the subcommand sp get
snmp-destinations. All SP events are translated into SNMP traps and sent to all
configured destinations.
manage miscellaneous SP functions.
TABLE H-40
Description
Tests and validates different types of configurations you may
be considering for the SP.
Retrieves the MAC address for the SP.
Retrieves the last port 80 postcode from the PRS Port80
register.
Returns the status of the overall system.
Captures data and stores it on the SP in compressed format.
Configures an SP with the same configuration as that of
another Service Processor.
Restarts the SP.
Restores selected settings of the SP to the default factory
configuration.
Appendix H Service Processor Commands 243