Sensor Commands - Sun Microsystems Fire V20z Management Manual

G
A P P E N D I X

Sensor Commands

The sensor command reports or sets the value of an environmental sensor or
control.
TABLE G-1
Note – Every subcommand returns a return code upon completion.
TABLE G-1
Subcommand
sensor get
sensor set
Note – There are some sensors whose value does not change, some that are there to
provide information in the event of a problem, and others to facilitate the proper
operation of the software.
Many of these sensors do not have a related component (parent) associated with
them. For example, the die-temperature sensor for a CPU has the CPU as its parent
component and a fan-speed sensor has the fan as its parent component; the
product-id sensor, however, only reports a static value and has no parent
relationship.
This relationship establishes the component(s) which is affected by changes in the
value of the sensor. You cannot modify the thresholds for sensors taht do not have a
parent relationship, since an event will never occur for these threshold crossings.
lists the sensor subcommands.
Sensor Subcommands
Description
Returns all data associated with a sensor.
Sets some of the data associated with a specific sensor or a class of
sensors.
213