Return Codes - Sun Microsystems Fire V20z Management Manual

Return Codes

lists the arguments for this subcommand.
TABLE G-5
Note – There are some sensors whose value does not change, some that are there to
provide information in the event of a problem, and others to facilitate the proper
operation of the software.
Many of these sensors do not have a related component (parent) associated with
them. For example, the die-temperature sensor for a CPU has the CPU as its parent
component and a fan-speed sensor has the fan as its parent component; the
product-id sensor, however, only reports a static value and has no parent
relationship.
This relationship establishes the component(s) which is affected by changes in the
value of the sensor. You cannot modify the thresholds for sensors that do not have a
parent relationship, since an event will never occur for these threshold crossings.
Return Codes for Subcommand sensor set
TABLE G-5
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_RPCTimeout
NWSE_RPCNotConnected
NWSE_InvalidArgument
NWSE_NotFound
NWSE_NoPermission
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting options
1
specified.
Request was issued, but was not serviced by the server.
2
RPC procedure timed out and the request may or may
not have been serviced by the server.
Unable to connect to the RPC server.
3
One or more arguments were incorrect or invalid.
4
Entity (user, service, file, path or other) was not found.
5
Not authorized to perform this operation.
6
Appendix G Sensor Commands 219