Sun Microsystems Fire V20z Management Manual page 79

Follow these steps to configure the SSL certificate from the SM Console:
1. Click Configuration>SSL Certificate from the menu bar.
2. Select the radio button to designate SSL access as required or optional.
SSL Configuration
FIGURE 1-16
3. Do one of the following, depending on whether you selected required or optional:
If you selected Required, select the radio button for the type of SSL certificate
■
configuration you want to use, factory-installed or your own in-house certificate
management.
If you selected User-supplied:
■
a. Enter the name of your generated certificate file to be installed with Apache on
the SP, or click the Browse button to search for a file.
b. Enter the name of your generated key file to be installed with Apache on the
SP, or click the Browse button to search for a file.
4. Click the check-mark button.
Chapter 1 Introduction 55