Return Codes; Sp Set Logfile Subcommand; Format - Sun Microsystems Fire V20z Management Manual

Return Codes

lists the return codes for this subcommand.
TABLE H-37
Return Codes for Subcommand sp get logfile
TABLE H-37
Return Code
NWSE_Success
NWSE_InvalidUsage
NWSE_RPCTimeout
NWSE_RPCNotConnected
NWSE_NoMemory

SP Set Logfile Subcommand

Description: Configures the event log file that is the destination of all Event Manager
events and notices.

Format

sp set logfile [ {-f | --file} FILENAME] [ {-s | --size} SIZE]
You must specify the name of the file to which the Event Manager sends logs. When
setting the log file using this command, specify only the name of the log file without
the path. File names cannot contain the forward slash character (/), backward
relative-path reference (..) or the less-than symbol (<).
lists the arguments for this subcommand.
TABLE H-38
Arguments for Subcommand sp set logfile
TABLE H-38
Argument Description
Specifies the name of the file within the directory to which the Event
{-f | --file}
Manager sends logs.
Specifies the size of the file in megabytes. A minimum size of 0.01 MB
{-s | --size}
is required for this log file.
ID Description
Command successfully completed.
0
Invalid usage: bad parameter usage, conflicting
1
options specified.
Request was issued, but was not serviced by the
2
server. RPC procedure timed out and the request
may or may not have been serviced by the server.
Unable to connect to the RPC server.
3
Insufficient memory.
8
Appendix H Service Processor Commands 241