Backup Copies Of Ini And Auxiliary Files; Upgrading Mediant 2000 Software - AudioCodes Mediant 2000 User Manual

User's Manual
# ------------------------------------
CptFileURL = 'http://www.corp.com/call_progress.dat'
# Check for updates every 60 minutes
AutoUpdateFrequency = 60
# Additional configuration per device
# -----------------------------------
# Each device will load a file named after its MAC address,
# e.g. config_00908F033512.ini
IniFileTemplateURL = 'http://www.corp.com/config_<MAC>.ini'
# Reset the device after configuration has been updated.
# The device will reset after all files were processed.
RESETNOW = 1
4. You may modify the master_configuration.ini file (or any of the config_<MAC>.ini
files) at any time. The Mediant 2000 queries for the latest version every 60
minutes, and applies the new settings immediately.
5. For additional security, usage of HTTPS and FTPS protocols is recommended.
The Mediant 2000 supports HTTPS (RFC2818) and FTPS using the AUTH TLS
method ((RFC 4217) for the Automatic Update facility.
6. To download configuration files from an NFS server, the file system parameters
should be defined in the configuration ini file. The following is an example of a
configuration ini file for downloading files from NFS servers using NFS version 2:
# Define NFS servers for Automatic Update
[ NFSServers ]
FORMAT NFSServers_Index = NFSServers_HostOrIP, NFSServers_RootPath,
NFSServers_NfsVersion;
NFSServers 1 = 10.31.2.10, /usr/share, 2 ;
NFSServers 2 = 192.168.100.7, /d/shared, 2 ;
[ \NFSServers ]
CptFileUrl = 'file://10.31.2.10/usr/share/public/usa_tones.dat'
VpFileUrl =
'file://192.168.100.7/d/shared/audiocodes/voiceprompt.dat'
6.5

Backup Copies of ini and Auxiliary Files

Be sure to separately store a copy of the ini file and all auxiliary files, as well as a note
of the software version for use should a board require replacement.
6.6

Upgrading Mediant 2000 Software

To upgrade the Mediant 2000's firmware, load the upgraded firmware cmp file into the
Mediant 2000 (and optionally burn it into integral non-volatile memory) using:
1. Embedded Web Server - For a complete description of this option refer to'
'Software Upgrade Wizard'' on page 255.
2. BootP/TFTP Server - By using the -fb BootP command line switch, the user can
direct the board to burn the firmware on the non-volatile memory. The board
thereby downloads the specified firmware name via TFTP and also "burns" the
firmware on the non-volatile memory.
Version 5.0
6. Mediant 2000 Initialization & Configuration Files
73 June 2006