Monitoring The Mp-1Xx; Front Panel Leds; Table 6-1: Definition Of Mp-1Xx Front Panel Led Indicators - AudioCodes MP-1xx Fast Track Installation Manual

Fast Track Installation Guide
6

Monitoring the MP-1xx

The MP-1xx provides several ways of monitoring the status of the gateway:
•
Monitoring the MP-1xx front panel LEDs (refer to Section
•
Monitoring the MP-1xx rear panel LEDs (refer to Section
•
Monitoring the MP-1xx channels via the Embedded Web Server (refer to Section
page 32).
6.1

Front Panel LEDs

The MP-1xx front panel LEDs indicate the Ethernet LAN status, Data (RTP) activity and state of
the gateway ports.
LED Type
Device
Ready
Status
Ethernet
LAN
Link Status
Control
Control
Link
Packet
Data
Status
Telephone
Channels
Interface
Version 4.4
Table 6-1 describes the meaning of each state of the LEDs on the front panel.

Table 6-1: Definition of MP-1xx Front Panel LED Indicators

Color State
Green ON
Orange Blinking
Red ON
Green ON
Red ON
Toggles
Green
/ Blinking
Blank
Green Blinking
Red Blinking
Blank
Green ON
Green Blinking
Red ON
Blank
6.1
6.2
Definition
Device powered, self-test OK
Software loading/Initialization
Malfunction
Valid 10/100 Base-TX Ethernet connection
Malfunction
MGCP:
Changes between green and off. Indicates activity,
control messages are received in real time.
H.323 / SIP:
Sending and receiving H.323 / SIP messages.
No traffic.
Transmitting packets
MP-1xx is receiving data packets
No traffic
The phone is offhooked (FXS); the FXO offhooks the
line towards the PBX.
There's an incoming call, before answering
Line malfunction
Normal onhook position
31
6. Monitoring the MP-1xx
below).
on page 32).
6.3
March 2005
on